|
困扰电动绞盘用户的一个最大问题是绞盘不能够连续工作，因此每一款电动绞盘手册上均明确标明持续工作时间为60秒，其根本原因是电动绞盘的驱动电机以大功率大电流工作，产生巨大的热量难以排出，过热是电机的最大风险，因此而产生的绞盘故障也不在绞盘的保修范围内。
温控系统不能够从根本上解决这个问题，因为最敏感有效的温控系统也只是告诉用户温度过高应该停止工作，或者自动停止工作。要从根本上散热，目前最有效的方式是水冷或者风冷。
WARN Endurance 12.0是一款风冷电动绞盘，在绞盘电机绕组外具有一进出风道，并由外部独立风机提供循环风能。
The new Warn Endurance 12.0 is the latest flag bearer for Warn winches. This unique winch features a small, remote-mountable 2600 cfm fan that forces air through an hose and into the motor housing to keep it cool. Considering that heat build-up is a big killer of electric winches, this innovation should give this new Warn tremendous, well, endurance, hence the name. We're still waiting to see the duty cycle rating for this new winch but we expect it to be significantly better than any other electric winch. The longer duty cycle could make it more appealing to people who currently choose hydraulic winches, and fans of electric winches will be happy to have the extra durability.
新的Warn耐力12.0是最新的旗手绞车。这种独特的绞车一个小功能，远程安装2600公司CFM风扇，迫使空气通过软管进入发动机的住房保持冷静。考虑到热建设是一大杀手，电动绞车，这种创新应给予警告这一新的巨大的，那么，耐力，因而得名。我们仍在等待看到占空比评价这一新的绞车，但我们预计它是明显优于其他任何电动绞车。较长的占空比可以成为更具吸引力的人选择谁目前液压绞车，和球迷的电动绞车将很乐意为有额外的耐用性。
WARN Endurance 12.0 Fan Cooled Winch
Model #: Warn 73010
官方报价: $2,026.65
冷却风扇安装
•扇必须正确安装，提供最佳的性能。风扇应安装在一个位置是清洁，干燥，凉爽的possible.The安装位置还必须提供清关风扇的控制电缆以及出口软管。当越来越多的球迷，确保入口的畅通，并高于绞车。又保证绞车排气口附近没有风扇入口。
•最佳地点风扇将取决于车辆。典型的地点包括：附近的进气口内框和挡泥板引擎室里面。避免安装风扇附近排气歧管，涡轮增压器，或散热器。最大工作温度为175 °函数f （ 80 ℃ ） 。避免锋利的路由时，风扇控制电缆和软管。
•如果您的车辆使用条件极为尘土飞扬，你可以选择装备绞盘冷却风扇的高性能过滤器。过滤器零件编号一架RC - 0790可以从K ＆ ñ筛选推荐此应用程序。该过滤器可以直接安装在风机入口。
点击图片浏览清晰产品结构示意图
Cooling Fan Mounting Instructions
• The fan must be correctly installed to provide the best performance. The fan should be mounted in a location that is as clean, dry, and cool as possible.The mounting location must also provide clearance for the fan’s control cable as well as the outlet hose. When mounting the fan, insure that the inlet is unobstructed and higher than the winch. Also insure that the winch exhaust outlet is not near the fan inlet.
• Best locations for the fan will vary depending on the vehicle. Typical location include: near air intake box and inner fender inside engine compartment. Avoid mounting fan near exhaust manifold, turbocharger, or radiator. Maximum operating temperature is 175°F (80°C). Avoid sharp edges when routing fan control cable and hose.
• If your vehicle is used in extremely dusty conditions you can choose to equip the winch cooling fan with a high performance filter. Filter part number RC-0790 available from K&N Filters is recommended for this application. The filter can be installed directly to the fan inlet.
用户手册(Endurance 12.0 Operator's Manual)下载 // 更多Warn产品 // 更多技术支持
| ENDURANCE 12.0 SPECS/PART NUMBER |
| Part Number: 73010 |
| Rated Line Pull: 12,000 lbs. (5440 kg) |
| Motor: Series-Wound 4.6 hp 12V |
| Remote Control: Remote switch, 12' (3.7m) lead |
| Geartrain: 3-stage planetary |
| Gear Ratio: 216:1 |
| Clutch (freespooling): Sliding ring gear |
| Brake: Mechanical cone brake |
| Drum Diameter/Length: 2.5" diam./9" length (6.4cm/22.9 cm) |
| Wire Rope: 80' of 3/8" (24m of 9.5mm diam.) |
| Fairlead: Roller |
| Recommended Battery: 650 CCA minimum for winching |
| Battery Leads: 2 gauge, 72" (1.83m) |
| Finish: High-gloss black powdercoat |
| Nuts/Bolts: PN 39625 |
|
| 12V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 (0) |
39.5 (12.0) |
47.8 amps |
1/12,000 (5440) |
| 2000 (910) |
15.1 (4.60) |
127.0 amps |
2/9517 (4317) |
| 4000 (1810) |
10.4 (3.17) |
192.0 amps |
3/7886 (3577) |
| 6000 (2720) |
7.7 (2.35) |
257.0 amps |
4/6732 (3054) |
| 8000 (3630) |
6.1 (1.86) |
316.0 amps |
|
| 9500 (4310) |
4.8 (1.46) |
358.0 amps |
|
| 12000 (5440) |
3.4 (1.04) |
429.0 amps |
| |
| |
| Above performance specs are based on first layer of drum |
JEEP装车效果图 |
| 
